Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[802.3_RTPGE] PHY & cabling objectives



Mehmet,

 

Thanks again for arranging today’s conference call. Lots of great discussion.

 

George Zimmerman and I were talking off-line about potential objectives. Objectives are tough because the study group needs them to bound the scope of the project without limiting the potential for the task force to consider multiple solutions. 

 

With that in mind, here’s some potential considerations:

 

Define a twisted-pair copper cabling channel model(s) that supports:

·         Fewer than four twisted-pairs

·         X connectors

 

Define a 1000 Mb/s PHY that would support channels of:

·         At least 40 m in an automotive environment

·         At least x m in an industrial environment

 

The number of connectors still needs to be defined, and there also needs to be some presentations around the reach requirements for the markets/applications.

 

It would also be interesting to get feedback from those participating in the study group about whether or not the study group might wish to consider a reach for the shorter-reach consumer market.

 

Cheers,
Brad

 

 

Brad Booth

Director, Network Architecture

Social Media and Community Professional

Dell | Office of the CTO, Networking

brad_booth@xxxxxxxx

office +1-512-723-7106, mobile +1-503-830-9366