Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [802.3_NGEPON] NG-EPON IC Draft D1.0 is available



Dear colleagues,

 

I would like to clarify one issue that came up, as signaled by a few individual who already started reading the draft and commenting on it. The PDF document contains two different sets of page numbers: one set is embedded in the PDF document itself, and the other one is displayed by you PDF reader. The issue is demonstrated below, where the PDF document identifies the given page as 16, while the reader shows page 31 of 95.

 

 

For commenting purposes, please use the page number as shown by your PDF reader, and not page numbers embedded in the document. This will allow you to comment on the frontmatter as well. In the future revisions, Editors will align page numbering to make sure that this issue is not observed anymore

 

Marek Hajduczenia,

NG-EPON IC, Acting Chair

 

From: Marek Hajduczenia [mailto:marek.hajduczenia@xxxxxxxxx]
Sent: Sunday, January 18, 2015 5:01 PM
To: STDS-802-3-NGEPON@xxxxxxxxxxxxxxxxx
Subject: NG-EPON IC Draft D1.0 is available

 

Dear Colleagues,

 

This is the announcement of the availability of draft D1.0 of NG-EPON IC report, and the opening of the commenting period.

 

REVIEW SCOPE:

The scope of the review is the complete NG-EPON IC report draft.

 

REVIEW PERIOD OPEN:

Sunday 18th January 2015

 

REVIEW PERIOD CLOSE:

Thursday 29th January 2015 23:59 AOE

 

Thank you for your participation and careful review of the draft report.

 

Marek Hajduczenia,

NG-EPON IC, Acting Chair

 

----------------------------------------------------------------

 

INSTRUCTIONS FOR SUBMITTING COMMENTS ON: NG-EPON IC Draft D1.0

 

Instructions for accessing the documents and submitting comments follow.

 

HOW TO ACCESS THE DRAFT

 

The draft is posted for your review for review purposes only, and neither the draft nor access information should be copied or redistributed to others in violation of document copyrights.

 

The NG-EPON IC draft D1.0 may be downloaded from: <http://www.ieee802.org/3/ad_hoc/ngepon/private/report/NG_EPON_IC_R1_0.pdf>

 

This document is posted in Adobe "pdf" document format and can be downloaded and printed if desired. If you do not have Adobe Acrobat Reader, it may be downloaded for free downloading from Adobe from: http://www.adobe.com/prodindex/acrobat/readstep.html

 

An editable version of the draft in DOCX format is also available to facilitate preparation of submissions. Please DO NOT comment against the editable version of the draft report.

 

HOW TO SUBMIT YOUR COMMENTS

 

Please email comment file and all additional supplemental files directly to NG-EPON IC Editors

 

HOW TO SUBMIT COMMENTS

 

Acceptable comment types:

 

E = Editorial

ER = Editorial Required (a binding comment that is part of a DISAPPROVE vote, therefore only appropriate for an IEEE 802.3 voting member)

T = Technical

TR = Technical Required (a binding comment that is part of a DISAPPROVE vote, therefore only appropriate for an IEEE 802.3 voting member)

 

1. Prepare your comments in one of the following two ways:

 

a. You are STRONGLY REQUESTED to use the comment tool at the URL:

 

<http://www.ieee802.org/3/WG_tools/filemaker/Generic_Commenting_Tool.zip>

 

To use the tool, extract all components into a folder and do not move any component from that folder as this will cause the executable to not work correctly. The tool is:

 

Comment_Tool_Generic_Solution.exe

 

A tutorial on the use of the commenting tool can be found at: http://www.ieee802.org/3/av/public/2007_09/3av_0709_lynskey_2.pdf

 

b. To submit comments in text (ASCII) form, please use the form below. This will make it possible for the editor to properly record and track all submissions. Make as many copies of the template as necessary and submit as an ASCII text file or as part of your e-mail.

 

PLEASE NOTE: The ASCII method involves a manual transcript of individual comments, hence you are recommended to check your comments to ensure accurate transcription when the comment file is made available. Please use the comment tool above if possible.

 

------CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE--------

 

CommentID: (Leave Blank)

CommenterName:

CommenterEmail:

CommenterPhone:

CommenterCellPhone:

CommenterCompany:

Clause:

Subclause:

Page:

Line:

CommentType: (E, ER, T, or TR)

Comment:

CommentEnd:

SuggestedRemedy:

RemedyEnd:

 

--------------------end comment template------------------