Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

RE: stds-80220-requirements: Latency and Packet Error rate (4.1.8)

Title: Latency and Packet Error rate (4.1.8)
Given that the air interface is going to be used for IP traffic, I propose we replace the text of 4.1.8 and 4.1.9 with the following paragraph:
 
The system shall support a variety of traffic classes with different latency and packet error rate requirements as
-----Original Message-----
From: owner-stds-80220-requirements@majordomo.ieee.org [mailto:owner-stds-80220-requirements@majordomo.ieee.org]On Behalf Of Humbert, John J [NTWK SVCS]
Sent: Thursday, November 13, 2003 4:13 PM
To: stds-80220-requirements@ieee.org
Cc: Landon, Jim [GMG]
Subject: stds-80220-requirements: Latency and Packet Error rate (4.1.8)

Attached is the contribution that Anna provided at the Plenary meeting, 

1)      The CG needs to come to consensus on the TBR  values.
2)      Is there still a need to specify ARQ loop delay to be consistent with the PAR?


<<Latency&PacketErrorRate.doc>>

John J. Humbert

6220 Sprint Parkway

Mailstop KSOPHD0504 - 5D276

Overland Park, KS 66251-6118

PCS (816) 210-9611