Thread Links			Date Links
Thread Prev	Thread Next	Thread Index	Date Prev	Date Next	Date Index

Re: [802.21] MIH commands for handover

To: Srinivas.Sreemanthula@NOKIA.COM
Subject: Re: [802.21] MIH commands for handover
From: Sanjib Das <Sanjib.Das@lntinfotech.com>
Date: Fri, 11 May 2007 08:35:28 +0530
Cc: STDS-802-21@listserv.ieee.org
In-Reply-To: <E30FA710604C274D9FA87C74429B594A02CE536D@daebe101.NOE.Nokia.com>
List-Help: <http://listserv.ieee.org/cgi-bin/wa?LIST=STDS-802-21>, <mailto:LISTSERV@LISTSERV.IEEE.ORG?body=INFO STDS-802-21>
List-Owner: <mailto:STDS-802-21-request@LISTSERV.IEEE.ORG>
List-Subscribe: <mailto:STDS-802-21-subscribe-request@LISTSERV.IEEE.ORG>
List-Unsubscribe: <mailto:STDS-802-21-unsubscribe-request@LISTSERV.IEEE.ORG>
Sender: stds-802-21@ieee.org

Hi Srini

Well I agree with u that NCoA can be sent over serving link, this is wat the
predictive mode as far as my knowledge is concerned...
how will you send NCoA information in case of reactive mode of
handover.....
In that scenario either the L2 messages should carry IP information or
MIHF should do the same. ofcource this in turn needs changes to MIH
message parameters...

thanks & regards
Sanjib
______________________________________________________________________

Follow-Ups:
- RE: [802.21] MIH commands for handover
  - From: Srinivas.Sreemanthula

References:
- RE: [802.21] MIH commands for handover
  - From: Srinivas.Sreemanthula

Prev by Date: Re: [802.21] MIH commands for handover
Next by Date: Re: Re: [802.21] MIH commands for handover
Previous by thread: RE: [802.21] MIH commands for handover
Next by thread: RE: [802.21] MIH commands for handover
Index(es):
- Date
- Thread