Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[10GBASE-CX4] RE: [802.3] 10GBASE-CX4 Notice to IEEE 802.3




Upon first review of the PAR and 5 Criteria, my only concern is the use
of the term "copper media" with references to 10GFC and IB4x.  For those
that may not be familiar with those cables, "copper media" could infer
the inclusion of UTP copper media.  It would be my recommendation that
the 10GBASE-CX4 Study Group be a little more explicit in its reference
to the type of cabling, i.e. shielded copper media or shielded
twisted-pair copper media.

Thanks,
Brad

-----Original Message-----
From: DOVE,DANIEL J (HP-Roseville,ex1) [mailto:dan.dove@hp.com] 
Sent: Wednesday, February 26, 2003 1:17 PM
To: 802. 3 Working Group (E-mail); 10GBASE-CX4 (E-mail)
Subject: [802.3] 10GBASE-CX4 Notice to IEEE 802.3



Dear Colleagues,

The 10GBASE-CX4 Study Group has been extremely busy over the last 4
months.
Since our CFI and the authorization of our study group, we have had
three
meetings and numerous teleconferences. As we described in our schedule
last
November, we have developed a PAR, 5 Criteria, Objectives and a working
paper so that we can get a specification developed in record time.

There has been a huge amount of consensus within the group on our
direction
and the working paper we have developed. Most votes have been unanimous
as
can be seen by reviewing our meeting content on the web.

Per our schedule, we have now a complete working paper. This document
has
been reviewed by the Study Group, improved, and detailed to meet our
objective of bringing it before the 802.3 Working Group for ballot if
our
PAR is approved. If our PAR is approved and our working paper is allowed
to
become a draft that goes out to ballot, we will have the opportunity to
perform two re-circulation ballots prior to the July Plenary. 

We were required to bring this document to 802.3 at least one week
before
the Plenary, but we are bringing it forward today, ahead of schedule, so
that you may have more time to review and provide feedback to our
reflector
at mailto:stds-802-3-10GBCX4@ieee.org. We intend to continue our review
process, and if any changes are required prior to sending it out to
ballot,
we will walk through those changes at the closing 802.3 plenary on
Thursday.

I realize that this is a very aggressive goal we are trying to attain,
but I
also have been extremely impressed by the volunteerism, dedication, and
detail that our team has applied to the problem. I hope that your review
of
this document confirms my impression.

Please jump over to our website at
http://www.ieee802.org/3/10GBCX4/index.html to see our progress and the 
working paper.

Best Regards,

Dan Dove
Chair, 10GBASE-CX4 Study Group
======================================
Principal Engineer, LAN PHY Technology
System Architect, Workgroup Switching
dan.dove@hp.com     
hp ProCurve Networking Business
8000 Foothills Blvd. MS 5555
Roseville, CA 95747-5555
Phone: 916 785 4187
Fax  : 916 785 1815
======================================