|Thread Links||Date Links|
|Thread Prev||Thread Next||Thread Index||Date Prev||Date Next||Date Index|
Dear SEC Members, Attached are the comments that the RR-TAG proposes to file with the FCC. The comments are in opposition to waivers being requested to allow a 1W transmit power and an exception to the PSD limit contained in the FCC rules (15.247). As a communication by a WG or TAG with a government body a five day EC review period is required. The RR-TAG is conducting an electronic ballot and a 75% majority is needed. That ballot closes at midnight 27 January. The date for comments to be received by the FCC is 30 January. Since there isn't time after a successful RR-TAG ballot for an EC review I am asking that the EC review begin today, 24 January. That review is conditioned by 1) the RR-TAG approving the comments in their ballot and 2) that no changes of substance will be made to the document as it appears in this email. I propose that the EC review closes on 29 January. At that time I will also advise the EC if the ballot was successful. Regards, Mike +1 972 684 7518 (ESN 444 7518) Voice +1 972 684 3774 (ESN 444 3775) FAX +1 972 814 4901 (ESN 450 9401) Mobile -----Original Message----- From: Lynch, Michael [RICH1:2H50:EXCH] Sent: Thursday, January 19, 2006 16:03 To: STDSemail@example.com Subject: RE: [802-18] Comments on FCC ET Docket 05-356, Request for Waiver All, Enclosed are the proposed comments of the RR-TAG on this request for Waiver. The ballot closes at midnight 27 January. Regards, Mike -----Original Message----- From: Lynch, Michael [RICH1:2H50:EXCH] Sent: Thursday, January 19, 2006 13:30 To: STDSfirstname.lastname@example.org Subject: [802-18] Comments on FCC ET Docket 05-356, Request for Waiver All, This is to advise you that there will be an email ballot on possible 802.18 comments to the above request for waiver. A copy of the waiver petition and the public notice are attached. The proposed RR-TAG comments will be circulated on 19 January. The ballot will close at midnight 27 January. The petition requests power of 1W and a waiver of the PSD requirement in the FCC rules (15.247). This equipment is intended to operate in the 902 - 928 MHz band. Regards, Mike <<DA-05-3339A1_notice.doc>> <<ET 05-356 Octatron.pdf>> ---------- This email is sent from the 802 Executive Committee email reflector. This list is maintained by Listserv.