Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [802SEC] IEEE 802 Orientation slides, 2018 update (draft)


Adding to John's feedback:

a) I'd like to see the Affiliation and 802 Participation topics to be covered one right after the other in the meeting.
b) slide 10: change "Document that authorizes work on a standardization Project" to "Document that requests authorization to begin a standardization Project"
c) slide 11: change "Group formed to investigate a potential project and produce a PAR" to "Group chartered to investigate the initiation of a potential project and produce a draft PAR if appropriate"
d) slide 17: a Study Group is optional, add [optional] similar to CFI/TIC/IC box
e) slide 17: a Study Group produces 'draft PAR and CSD' (to be consistent with (c) above
f) slide 17: change "Start work in Working Group" to "Start work on approved Project in Working Group
g) slide 17: change arrow "Standards Board Approval" to "Standards Board approves Project Request"
h) slide 19: change box "Standards Board Approval" to "Standards Board approves Project's final draft"
i) slide 20: add initial bullet clarifying a Standard consists of Base+amendments+corrigenda (optionally give a hypothetical example too?)
j) slide 28: add please feel free to ask anyone on the EC for more information or help (but mostly Roger...)



------ Original Message ------
From: "John DAmbrosia" <>
Sent: 6/27/2018 12:57:33 PM
Subject: Re: [802SEC] IEEE 802 Orientation slides, 2018 update (draft)

Roger –

Here is my feedback




  1. Mentor Doc # missing
  2. Page 6 -prior diagram noted that there were 25 IEEE societies and councils – now there are only 2?
  3. Previously 802 was noted under standardization activities, now it is only noted under technical activities.  While I understand IEEE-SA may want to broaden what they are seen as doing – 802 is about market relevant standards – this seems lost in this new diagram.
  4. Slides 7 & 8 should be deleted IMO.  This is a newcomer program for IEEE 802- not IEEE.  If IEEE wants to have its own introduction – let it do it- and not dilute this orientation.
  5. Slide #9 deleted this bullet - Voter’s are individuals, not entities (e.g. companies).  I think this needs to stay in the orientation- it is a key point.
  6. I do not care for the definition of IC as non-standardization activity – it is a pre-PAR activity that may lead to standardization activity.  In addition it is an approach used to help people get standards activities started. 
  7. Slide #16 – why the inclusion of bylaws / ops manual here?  The page is noted as 5 basic principles.  There are more inclusive lists of governing docs to use.  Suggest you create new slide for related gov docs.
  8. Page 22 – you imply that membership starts when attending …. – this implies it is automatic – that is not the case for 802.3 – I can’t comment on all the groups – but this intro needs to be inclusive.
  9. Page 25 – Comment regarding photographs or recordings is not up to date.  Please refer to  see section
  10. I actually believe the Participation Slide SHOULD be shown, reviewed, discussed.  This is a key slide.



From: ***** IEEE 802 Executive Committee List ***** <> On Behalf Of Roger Marks
Sent: Wednesday, June 27, 2018 1:06 AM
Subject: [802SEC] IEEE 802 Orientation slides, 2018 update (draft)


Dear EC,


One of my action items is to update the IEEE 802 Orientation slides, used in the Newcomer Orientation on Monday morning of the Plenary Session. I plan to introduce the new version at the July Plenary.


I have drafted a revision, based on the existing slides. I've updated and added some content, and I've refreshed the look. Much of the visual presentation comes from slides that Glenn and Jodi prepared for the Fellowship program. Thanks to them for that.


I've uploaded a draft at <>. I think this is close to final, but I welcome any comments within a week from now. I'll use a new document serial number for the final version.





To unsubscribe from the STDS-802-SEC list, click the following link:

To unsubscribe from the STDS-802-SEC list, click the following link:

To unsubscribe from the STDS-802-SEC list, click the following link: