[STDS-802-11-TGBE] Call for TTT members of a new PHY TTT - "Tx requirements for PPDUs sent in response to a triggering frame"

[Edward Au <edward.ks.au@xxxxxxxxx>]

Acknowledged with thanks, Mengshi:

PHY

Transmit requirements for PPDUs sent in response to a triggering frame

Mengshi Hu

Uploaded:   Presented:   Straw Polled:

Hello all,

If you would like to work with Mengshi to prepare text for this PHY subclause, please let me know and I will add you to the TTT.

Regards,
Edward

On Tue, Jan 12, 2021 at 8:14 PM humengshi <humengshi@xxxxxxxxxx> wrote:

Hello Edward

 

I would like to volunteer to be the POC for the following

5)  PHY

Transmit requirements for PPDUs sent in response to a triggering frame

 

Best wishes

Mengshi Hu

 

 

发件人: Edward Au [mailto:edward.ks.au@xxxxxxxxx]
发送时间: 2021年1月12日 22:34
收件人: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
主题: [STDS-802-11-TGBE] New placeholder subclauses - call for PoCs

 

Hello all,

 

When I roll-in those recently approved PDT or PDT-TBD texts, I am instructed to create the following placeholder subclauses:

 

1) Frame format

EHT PHY Capabilities Information field

 

2) MAC:   Uplink MU operation 

TXVECTOR parameters for EHT TB PPDU response to TRS Control subfield

 

3) MAC:   TWT operation

EHT subchannel selective transmission

 

4) MAC:   Spatial reuse operation

General
General operation with non-SRG OBSS PD level
General operation with SRG OBSS PD level
Adjustment of OBSS PD and transmit power

 

5)  PHY

Transmit requirements for PPDUs sent in response to a triggering frame

 

Please let me know if these placeholder subclauses are needed.  If so, please let me know who would volunteer as a PoC to prepare contributions/PDT texts for these placeholders.

 

Regards,
Edward

---

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

---

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1