Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-11-TGBE] TGbe latest documents for September plenary



Hi Alfred,

 

May I request to have more discussion on the resolution on CID11120 and CID11439 in 1344r2(Motion) 432.

 

The technical concern can be found as follows as well as in the reflector, and I don’t see any further response from the author and the commenters, etc.

 

Regarding the resolution on CID11120 and CID11439, there are two technical issues:

 

  1. (1st )Switch to DFS channel(encounter Radar)à(2nd )Switch to the second DFS channel: When the affiliated AP switches to first DFS channel and perform CAC, the affiliated AP shall set the disabled Link indication in RNR element to prevent legacy STA/ associated non-AP MLD/unassociated non-AP MLD probing that AP, the affiliated AP may switch to the second DFS channel when it encounters radar signal. In this scenario, the non-AP MLD can know when the affected AP starts beaconing via the updated Expected duration field in TID-To-Link Mapping element on the disabled link. The proposal to have the second Max channel switch Time signaling will confuse the non-AP MLD as two Timer appears in one Beacon/probe response frame.

 

  1. (1st )Switch to DFS channel(encounter Radar)à(2nd )Switch to the non-DFS channel: the non-AP MLD also can know the updated Beacon time via the updated Expected duration field in TID-To-Link Mapping element on the disabled link. And the affected AP will reduce the expected start Beaconing timer in such case. e.g. the affected AP expects to start beaconing after 1 mins when it’s stay in the DFS channel, and it will start Beacon immediately after switching to a non-DFS channel.

 

In summary, seems it’s not necessary to set a Max Channel Switch Time element again when the affected AP is on DFS channel, as the signaling can be obtained via the signaling in TID-To-Link Mapping element , please correct me if I make any mistake.

 

 

(#11120, #11439) NOTE - The reporting AP might increase the value carried in the Switch Time field of the Max Channel Switch Time element if the affected AP performs a second channel switch between the target time of a first channel switch and the time at which the affected AP will start beaconing on the new channel corresponding to the first channel switch

 

 

 

Thanks

 

Best Regards

 

Jay Yang

 

From: Alfred Asterjadhi <asterjadhi@xxxxxxxxx>
Sent: 2022912 11:20
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGBE] TGbe latest documents for September plenary

 

Hello all,

 

The most recent version of the TGbe agenda can be found here.

- If you have made requests for documents to be added to the agenda and it is currently missing please let me know. 

- If you have made a request for a document to be added to the agenda but is not uploaded yet please upload the document as soon as possible.

 

The most recent version of the TGbe motions document can be found here. First round of motions are scheduled on Wednesday AM1. Motions contain CID resolutions for which there was majority support during the past conf calls and during the ad-hoc. As the meeting progresses CIds from monday and tuesday sessions will be added to such list.

- Please let me know if any CID or document is missing in the list

-  Please review the CID list and revision numbers of the documents and let me know if any CID needs any further discussion.

 

Regards,


Alfred

 

--

Alfred Asterjadhi, PhD

IEEE802.11 TGbe Chair,

Qualcomm Technologies Inc.

Cell #:    +1 858 263 9445

Office #: +1 858 658 5302


To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1


To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1