Re: [STDS-802-11-TGBN] MAC PDTs for CID 1780 and 1783 - request review

[全映桥 (Yingqiao Quan) <yingqiao.quan@xxxxxxxxxx>]

Hi Chaoming,

 

       Thanks for your PDT/CR documents on NPCA topic. There are some comments and questions.

Most of editor notes are for TGbf editor in 25/0537r1 and 24/0538r1,they should be addressed by TGbn editor.

 

For  24/0538r1 :

Ø  The usage and definition of “NPCA Transmission Threshold field” and “minimum NPCA transmission duration” are not clear enough. Based on the text in this document, the value of minimum NPCA transmission duration = the value of NPCA Transmission Threshold field + the value of NPCA Switch Back Delay field + 392 and the unit is microsecond and the “NPCA Transmission Threshold field” does not indicate a “minimum NPCA transmission duration” directly .

Ø  So if you want to keep it (option #1), I suggest changing the name of this field to “NPCA transmission Threshold offset field” and changing the description for this field to “ The NPCA transmission Threshold offset field contains an unsigned integer that is added to 392us and the NPCA switch back delay of the NPCA AP to generate the value of the minimum NPCA transmission duration (parameter).

Ø  Or (option #2) we just keep this name and change it to indicate the minimum NPCA transmission duration directly. A note or normative text can be added in the Clause 37.11 to say that the value of “NPCA Transmission Threshold field” should be larger than or equal to 392 plus the NPCA switch back delay of the NPCA AP.

Ø  When should/shall a NPCA STA switch back to the BSS primary channel when it detects a long PPDU or TXOP on the NPCA primary channel? T1 : The end of NPCA duration; T2 : the minimum NPCA transmission duration before T1 (the end of NPCA duration); or T3 : when it recognizes that the end time of this long PPDU is later than T2 (the minimum NPCA transmission duration before the end of NPCA duration)?

 

For   25/0537r1 and 24/0538r1 (option #2):

Ø  Personally, I think the setting for the values of the NPCA Minimum Duration Threshold field and the NPCA Transmission Threshold field should be implementation dependent because these parameters only affect performance in some scenarios. So I prefer to mention the recommended settings for them in Clause 37.11 as a Note ,but not in Clause 9 as a normative text.

 

BR，

 

Yingqiao Quan

Communication Standards Devision

 

 

 

From: 罗朝明(Chaoming Luo) <000015d97e832564-dmarc-request@xxxxxxxxxxxxxxxxx>
Sent: Thursday, April 10, 2025 2:26 PM
To: STDS-802-11-TGBN@xxxxxxxxxxxxxxxxx
Subject: MAC PDTs for CID 1780 and 1783 - request review

 

注意: 这封邮件来自于外部。除非你确定邮件内容安全，否则不要点击任何链接和附件。 CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.

 

Hi All,

 

I’ve prepared two PDTs 25/0537r1 and 24/0538r1, which are addressing CIDs 1780 and 1783 under NPCA topic.

Could you please kindly review it and send me any feedback before April 17 ?

 

BR,

Chaoming

 

---

To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1

---

To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1