| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
|
Hi Duncan, Thanks for preparing this CR document. One question regarding when to suspend the UL data transmission, I think the following two sentences are conflicted or misaligned with each
other. We should define that the non-AP MLD shall not transmit any Data frames to the current AP MLD upon successful reception of the ST execution response with the Status Code field set to SUCCESS if the SMD Type field in the SMD Capabilities field in
the SMD Information element (see 9.4.2.356 (SMD Information element)) is equal to 0.
(#5017)Upon successful transmission of the ST execution request, the non-AP MLD shall not
transmit any Class 3 frames to the current AP MLD if the SMD Type field in the SMD Capabilities field in the SMD Information element (see 9.4.2.356 (SMD Information element)) is equal to 0. (#5017)Upon reception of an ST execution response frame with the Status Code field not set
to SUCCESS from the target AP MLD, all Class 3 frames shall be allowed between the current AP MLD and the non-AP MLD. Regards Guogang Huang 发件人: Duncan Ho <00002b3e54cff3e2-dmarc-request@xxxxxxxxxxxxxxxxx>
Dear Seamless Roaming TTT members, I’ve drafted this CR to address the UL data suspension and MLD state change. Could you please review it and let me know if you have any feedback? Hope to see you in Victoria! BR, Duncan To unsubscribe from the STDS-802-11-TGBN list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1
To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1 |