| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
|
Hello all, Currently in page 277, line 20 of D1.5, the following paragraphs exist: Insert the following paragraphs at the end of this subclause as follows: (#8701,#5400)If
the SCS Request frame with an SCS Description element containing a QoS Characteristics element that has an LLI Requested field value of 1 is rejected by an UHR AP by setting
the Status field value to REJECTED_WITH_SUGGESTED_CHANGES, the AP shall include an SCS Descriptor element containing a QoS Characteristics element in the SCS Response frame signaling the suggested QoS characteristics parameters for this SCS stream. The LLI Requested field in the QoS Characteristics element
included in the corresponding SCS Descriptor element in the SCS Response frame may differ from the
corresponding value in the requested SCS stream. The AP shall not set the corresponding SCS Status field of the SCS status duple in the
SCS Response frame to REJECTED_WITH_SUGGESTED_CHANGES when denying the SCS request for the requested SCSID if the Maximum Service Interval and the Minimum Service Interval fields values are zeros
and the LLI Requested field is set to 1 in the QoS Characteristics element included in the corresponding
SCS Descriptor element in the SCS Request frame. They should be in UHR SCS procedure subclause, in page 419, line 30, per the instructions in 11-26/0473r5. I will fix it in next revision. Please let me know if you have any comments on this or other roll-in errors, editorial improvement suggestions. Thanks. regards 于健 Ross Jian Yu Huawei Technologies To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1 |