Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[STDS-802-11-TGBP] 回复: [STDS-802-11-TGBP] SP text for tomorrow

Hi Alice,

 

Can you also add our contributions in the below as supporting doc? Thanks.

11-25/1262r1, 11-25/0790r0

 

Br,

 

Yinan

 

发件人: Alice Jialing Li Chen <jialing.li.phd2@xxxxxxxxx>
发送时间: 2025年9月17日 22:25
收件人: STDS-802-11-TGBP@xxxxxxxxxxxxxxxxx
主题: Re: [STDS-802-11-TGBP] SP text for tomorrow

 

Hi Bo,

Please add the following  SP to tomorrow SP list, ideally be run after Amichai's 2 SPs and before Shengquan's 2 SPs:

  • Do you agree to add the following to the 11bp SFD:
    • In the data field of AMP UL active transmission in 2.4 GHz,
      • 250kbps data rate only uses 1us chip duration and rate 1/2 binary convolution code (BCC)
      • 1Mbps data rate only uses 0.25us chip duration and the same rate 1/2 BCC
      • 4Mbps doesn’t use BCC
  • Supporting doc: 11-25/1215r1, 11-25/1552r0

 

Thanks,

Alice

 

 

On Wed, Sep 17, 2025 at 2:19 PM Shengquan Hu <000036fc915e2c29-dmarc-request@xxxxxxxxxxxxxxxxx> wrote:

Hi Bo,

 

  Please add the following two SPs to tomorrow SP list:

 

SP#1:

•        Do you agree to add the following to 802.11bp SFD?

–        The Uplink Sync Field Transmission from a non-Backscatter STA for all data rates shall have a length 48

     [Reference Contribution Doc# 11-25/1552r0]

 

 

SP#2:

•        Do you agree to add the followings to 802.11bp SFD?

o   Length-48 sync sequence for UL non-backscatter transmission is constructed by repeating length-24 base sequence twice, i.e. S48 = [S24 S24]

o   The length-24 base sequence is given as below:

S24=[1,  1,  1,  1,  1,  0,  1,  0,  0,  1,  1,  0,  0,  1,  1,  0,  0,  0,  0,  1,  0,  1,  0,  0]

             [Reference Contribution Doc# 11-25/1552r0]

 

Thanks,

Shengquan

 

From: Amichai Sanderovich <00003126a116a6ee-dmarc-request@xxxxxxxxxxxxxxxxx>
Sent: Wednesday, September 17, 2025 2:14 PM
To: STDS-802-11-TGBP@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGBP] SP text for tomorrow

 

External email : Please do not click links or open attachments until you have verified the sender or the content.

Hello Bo,

 

I have 2 SPs to run for this week meeting. If possible to run early slot on Thursday will be good.

 

SP1:

Do you agree to add into section 4.4.3 of the SFD the following text:

“11bp defines mandatory forward error correcting code (FEC) of coding rate ½ for the data portion of UL active transmission in 2.4 GHz at rates of 0.25,1Mbps and non-coded mode at rate of 4Mbps”

[Reference contributions: 11-25/1002r1]

 

Y:

N:

A:

 

SP2:

 

Do you agree to add into section 4.4.3 of the SFD the following text:

“11bp defines forward error correcting code (FEC) for the data portion of UL active transmission in 2.4 GHz based on the code as defined in 17.3.5.6 in 80211-2020”

[Reference contributions: 11-25/1002r1]

 

Y:

N:

A:

 

Thank you!

 

Best Regards

Amichai

 

To unsubscribe from the STDS-802-11-TGBP list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1

To unsubscribe from the STDS-802-11-TGBP list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1

To unsubscribe from the STDS-802-11-TGBP list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1

To unsubscribe from the STDS-802-11-TGBP list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1