Hi Alice,
Thanks for volunteering. Please go ahead and prepare the draft for AMP-SIG. Regarding subclause, the problem of re-ordering is the U-SIG part, which are further divided into two
sub-section. These two sub-sections will not show in the re-ordered subclause number because they are level 6 subclause. My suggestion is to re-structure 40.3.8.2 as 40.3.8.2.1 AMP-SIG and 40.3.8.2.2 AMP DL synchronization field. Later, we can move 40.3.8.2
after 40.3.8.8 U-SIG subclause if necessary.
Best regards,
Yinan
发件人: Alice Jialing Li Chen <jialing.li.phd2@xxxxxxxxx>
发送时间: 2025年11月14日
19:56
收件人: 亓祎男 <v-qiyinan@xxxxxxxx>; Bo Sun <sun.bo1@xxxxxxxxxxxxxxxx>; You-Wei Chen <you-wei.chen@xxxxxxxxxxxx>
抄送: STDS-802-11-TGBP@xxxxxxxxxxxxxxxxx
主题: Volunteer to be AMP-SIG PoC and re-ordering AMP preamble subclause
Hi Yinan, Bo, You-Wei, Others,
I volunteer to be the PoC of a new AMP-SIG subclause.
I also suggest to re-order the subclauses under the "AMP preamble subclause". Firstly, the ordering of the subclauses is better aligned with the ordering of fields in the DL PPDU formats. Secondly, it may make more sense
to let DL and UL have own separate "introduction" subclauses, or only DL needs an "introduction" subclause. Thirdly, add a new AMP-SIG subclause.
Current subclauses in D0.1:
The suggested subclause numbers after re-ordering:
-
40.3.8 AMP preamble
-
40.3.8.1 AMP DL preamble
-
40.3.8.1.1 Introduction (including the 1-sentence content in the D0.1 subclause of “Non-AMP portion of AMP PHY DL preamble”)
-
40.3.8.1.2 L-STF
-
40.3.8.1.3 L-LTF
-
40.3.8.1.4 L-SIG
-
40.3.8.1.5 RL-SIG
-
40.3.8.1.6 U-SIG
-
40.3.8.1.7 AMP DL synchronization field
-
40.3.8.1.8 AMP-SIG
-
40.3.8.2 AMP UL preamble
-
40.3.8.2.1 AMP UL synchronization field
Regards,
Alice Chen
Qualcomm
To unsubscribe from the STDS-802-11-TGBP list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1