Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-11-TGBP] SP text

Hi Bo,

 

Please add the following SPs to the SFD SP queue. SP1 was introduced in 11-26/0118 “A Scalable Low-Complexity Provisioning Method for Secure AMP Communication – Follow Up”. SP2 was deferred and modified from 11-25/1437 “A Scalable Low-Complexity Provisioning Method and Its Improvement for Secure AMP Communication”.

 

Dear All --- if you are interested in AMP security, please kindly let me know whether you have any comments or suggestions on these SPs before tomorrow’s SP session.

 

Thanks,

 

Hui

 

 

SP1

 

  • Do you agree to add the following text in the TGbp SFD --- 802.11bp shall specify a PMK input parameter field containing a PSK modifier and a PSK identifier in the Authentication Request frame, such that a non-AP AMP STA can derive a PMK for secure communication with an AMP AP by hashing the PSK modifier and a PSK of the non-AP AMP STA identified by the PSK identifier?
  • Note:
    • The secure AMP communication method is defined in Motion 64, 65, 66.
    • This does not apply to mono-static backscatter non-AP STAs.
  • Reference: 11-26/0118, 11-25/1437.

 

 

SP2

 

  • Do you agree to add the following text in the TGbp SFD --- 802.11bp shall specify a PMK input parameter field containing a PMK identifier and a PMK modifier in the Authentication Request frame, such that a non-AP AMP STA can derive a PMK for secure communication with an AMP AP by hashing the PMK modifier and an existing PMK in the non-AP AMP STA identified by the PMK identifier?
  • Note:
    • The secure AMP communication method is defined in Motion 64, 65, 66.
    • This does not apply to mono-static backscatter non-AP STAs.
  • Reference: 11-26/0118, 11-25/1437.

 

 

 

 

From: Amichai Sanderovich <00003126a116a6ee-dmarc-request@xxxxxxxxxxxxxxxxx>
Sent: Wednesday, January 14, 2026 12:13 PM
To: STDS-802-11-TGBP@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGBP] SP text

 

Caution: This e-mail originated outside Infineon Technologies. Please be cautious when sharing information or opening attachments especially from unknown senders. Refer to our intranet guide to help you identify Phishing email.

 

Hello,

 

I plan to run the following SPs, which were deferred from previous meeting.

Any feedback or concerns will be thankfully received.

 

SP1:

 

Do you agree to add the following text into the 11bp SFD: 

For all the data rates and/or MCSs that are defined for the active Tx non-AP AMP STA in 2.4GHz, the uplink transmitter symbol (chip) clock tolerance shall be ±104 ppm.

 

 

SP2:

 

Do you agree to add the following text into the 11bp SFD: 

802.11bp supports a one phase access mechanism for Active Tx non-AP AMP STAs, which includes:
An uplink payload transmitted in one of the random access time-slots indicated by an AMP trigger frame from an AMP AP

 

 

Best Regards

Amichai

To unsubscribe from the STDS-802-11-TGBP list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1

To unsubscribe from the STDS-802-11-TGBP list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1