Hi Bo,
Please defer my SP , SP 2 in SFD PHY SP SET #28, until further SP request.
Thanks!
Best Regards
Lumin
From: Sam Shi <Sam.Shi@xxxxxxxxxxxxxxxx>
Sent: Wednesday, March 25, 2026 2:34 AM
To: STDS-802-11-TGBP@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGBP] SFD SP request
Hi Bo,
After some offline discussion I would like to modify SFD MAC SP Set #24 as follows:
-
11bp supports communication between the AMP AP and STAs that without requiring a discovery and/or association phase.
-
An AMP DL PPDU with UL access information.
-
An AMP UL PPDU with UL response.
-
An AMP DL Ack acknowledges that the AMP UL PPDU was successfully received.
-
There is no Ack if the AMP UL PPDU was not received.
-
There is no Ack if the AMP UL PPDU was not received.
-
Note:
-
Whether security is applied to the UL response is TBD.
-
Content of the UL response is TBD.
-
The above does not apply to mono-static backscatter non-AP AMP STAs.
-
Whether security is applied to the UL response is TBD.
Thanks,
Sam
From: Solomon Trainin <solomon.trainin1@xxxxxxxxx>
Sent: Tuesday, March 24, 2026 2:39 AM
To: STDS-802-11-TGBP@xxxxxxxxxxxxxxxxx <STDS-802-11-TGBP@xxxxxxxxxxxxxxxxx>
Subject: [STDS-802-11-TGBP] SFD SP request
Hi Bo,
Please make the following changes to my SPs
SFD MAC SP Set #21
SP #2: Do you agree to add the following text into the 11bp SFD ?
•
IEEE 802.11bp defines unified MLME SAP primitives generated by a SME for an AMP STA to
setup, initiate, and update WPT on non-collocated vendor specific AMP Energizers.
[Reference: 11-26/0303r2]
SFD MACPHY SP Set #21
SP #3: Do you agree to add the following text into the 11bp SFD ?
·
The IEEE 802.11bp amendment shall include the aSIFSTime = 10 µs in the PHY definition.
[Reference: 11-26/0540r2]
SP #4: Do you agree to add the following text into the 11bp SFD ?
·
For immediate response of the AMP non-AP STA, unless TBD conditions, the AMP AP shall provide padding in the DL AMP PPDU that carry the AMP frame that solicits the immediate response
[Reference: 11-26/0540r2]
SP #5: Do you agree to add the following text into the 11bp SFD ?
·
For immediate response of the AMP non-AP STA, unless TBD conditions, the AMP AP shall provide different padding for protected and unprotected AMP frame that solicits the immediate response
[Reference: 11-26/0540r2]
SP #6: Do you agree to add the following text into the 11bp SFD ?
·
For immediate response of the AMP non-AP STA, unless TBD condition, the AMP AP default padding is equal to (40 +/–TBD) μs for a protected AMP frame that solicits the immediate response and (25+/–TBD) μs for an unprotected AMP frame that solicits the
immediate response
[Reference: 11-26/0540r2]
Best Regards,
Solomon Trainin
+972547885738
|
|
Virus-free.www.avg.com |
To unsubscribe from the STDS-802-11-TGBP list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1
To unsubscribe from the STDS-802-11-TGBP list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1
To unsubscribe from the STDS-802-11-TGBP list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1