Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-11-TGBP] PDT AMP Receive Procedure Update

Hi Bo,

 

Could you please add the following two revised PDT into PDT SP?

  • 11-26/0816r1, PDT 40.4.15 AMP tranmit procedure in Sub-1 GHz
  • 11-26/0817r1, PDT 40.4.16 AMP receive procedure in Sub-1 GHz

Thanks!

 

Best,

panpan

 

From: lipanpan (D)
Sent: Tuesday, May 12, 2026 3:01 PM
To: STDS-802-11-TGBP@xxxxxxxxxxxxxxxxx
Subject: RE: PDT AMP Receive Procedure Update

 

Hi all,

 

I have revised the two PDTs presented yesterday based on feedback.

Please help review and let me know if there’s anything. Thanks.

 

Best,

Panpan

 

From: liulumin <00004bd3b1d2f01a-dmarc-request@xxxxxxxxxxxxxxxxx>
Sent: Tuesday, May 12, 2026 2:45 AM
To: STDS-802-11-TGBP@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGBP] PDT AMP Receive Procedure Update

 

Hi All,

 

Thanks for the helpful discussion on the PDT text in today’s session. Based on the discussion, I made the following modifications to the draft:

  1. Adding the frequency shift parameter for active UL (if supported)
  2. Correcting typo of “AMP Enabled non-AP STA”
  3. Removing the signal loss detection, RSSI measurement in the text and the procedure and state machine figures
  4. Adding a way of ending receive procedure: “The AMP MAC may indicate the length of the MPDU to the PHY by TBD primitive after decoding the MAC header in the AMP-Data field. The PHY shall keep decoding until the number of decoded octets reaches the length of the MPDU.”

 

Please see the attached draft for details.

Comments and suggestions are greatly appreciated!

 

Best Regards

Lumin

To unsubscribe from the STDS-802-11-TGBP list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1

To unsubscribe from the STDS-802-11-TGBP list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1