Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[STDS-802-11-TGBP] PS MAC SP Set #3



Hello Bo,
Please kindly update the SPs text for PS MAC SP Set #3 as follows . 

SP #1: Do you agree on the following?

•802.11bp should define an AMP Authentication protocol that consists of a 3-way handshake (similar to EPPKE, 802.11bi) to perform mutual authentication and establish session keys.
•Note: This does not apply to mono static backscatter.
•Note: This does not apply to AMP-enabled non-AP STAs.

[Reference: 11-26/1346r1]


SP #2: Do you agree on the following?

•As part of the 3-way handshake, 802.11bp should define an AMP Authentication Request message, AMP Authentication Response message, and AMP Authentication Confirm message.
•The AMP Authentication Request message consists at least of the initiator’s identifier, a Nonce, a replay counter, and security parameters.
•The AMP Authentication Response message consists at least of the responder’s identifier, a Nonce, the replay counter, and a challenge.
•The AMP Authentication Confirm message consists at least of a status, the replay counter, and the response to the challenge.
•Note: This does not apply to mono static backscatter.
•Note: This does not apply to AMP-enabled non-AP STAs.

[Reference: 11-26/1346r1]


SP #4: Do you agree on the following?

•AMP Authentication could be initiated using either one of the following methods:
•A field in the DL AMP Triggering frame, or an AMP Authentication frame
•A field in an UL AMP Response frame from an AMP STA (in response to an AMP Triggering frame)
•Note: This does not apply to mono static backscatter.
•Note: This does not apply to AMP-enabled non-AP STAs.

[Reference: 11-26/1346r1]


SP #5: Do you agree on the following?

•An AMP Authentication frame containing an AMP deauthentication request shall be protected.
•Note: This does not apply to mono static backscatter.
•Note: This does not apply to AMP-enabled non-AP STAs.

[Reference: 11-26/1346r1]

Regards, 

G


To unsubscribe from the STDS-802-11-TGBP list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1