--- This message came from the IEEE 802.11 Working Group Reflector ---
Hi Volker, all,
I would like to self-nominate for the position of Vice-Chair for the UCM TIG.
I first attended an 802.11 meeting in 2019, and since the pandemic, I have been participating regularly. Over this time, my contributions have been primarily within TGbe, TGbn, and more recently TGbq. In TGbq, I conducted ray-tracing propagation
simulations to compare coverage performance between sub-7 GHz bands and mmWave bands for IMMW communications.
While I do not have prior experience in 802.11 leadership roles, I am eager to take on this opportunity to become more engaged and to deepen my understanding of the working group’s operations.
If appointed, I look forward to supporting Volker and the TIG in achieving our objectives and ensuring a productive and successful outcome.
Safe travels, and I look forward to seeing you in Waikoloa.
Best regards,
Charlie
Från:
*** IEEE STDS-802-11 List *** <STDS-802-11@xxxxxxxxxxxxxxxxx> för Jungnickel, Volker <volker.jungnickel@xxxxxxxxxxxxxxxxx>
Datum: torsdag, 11 september 2025 22:11
Till: STDS-802-11@xxxxxxxxxxxxxxxxx <STDS-802-11@xxxxxxxxxxxxxxxxx>
Ämne: [STDS-802-11] Unified Channel Model (UCM) TIG: Call for the Nomination of Vice Chair(s)/Editor(s)/Secretary
--- This message came from the IEEE 802.11 Working Group Reflector ---
Dear 802.11 participants,
With this second email, I am calling for the nomination of Vice Chair(s), Editor(s) of the report (or parts in it) and a Recording Secretary for the UCM TIG.
Please, reply to this email with a self-nomination, or the nomination of a colleague, including a short introduction of the candidate. There will be an opportunity to introduce all candidates to the group with Q&A.
If there is an issue or you have any concern, please, contact me. I am happy to help you.
Best regards,
Volker
--- This message came from the IEEE 802.11 Working Group Reflector ---
At the July session we approved the formation of the Unified Channel Model (UCM) TIG. I have appointed Volker Jungnickel as the chair of this TIG.
The UCM TIG charter is to discuss use cases and requirements, develop a Unified Channel Model (UCM) and enable performance comparison of proposals for multilink operation (MLO) across sub‑7 GHz
/ mm-wave / optical bands. The goal of the UCM TIG is to deliver a channel model that is spatially consistent across sub-7 GHz / mm-wave / optical bands, builds on already available and verified models, can be implemented using open software, and is well documented.
At the September session, the UCM TIG will meet
I understand that Volker already has a number of presentations lined up.
To unsubscribe from the STDS-802-11 list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11&A=1
To unsubscribe from the STDS-802-11 list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11&A=1
To unsubscribe from the STDS-802-11 list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11&A=1
|