Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[STDS-802-11] AW: [EXTERN] [STDS-802-11] Unified Channel Model (UCM) TIG: Call for the Nomination of Vice Chair(s)/Editor(s)/Secretary

--- This message came from the IEEE 802.11 Working Group Reflector ---

Hallo Volker,

 

I would like to express my interest in volunteering as Vice Chair of the UCM TIG.

 

My involvement in channel modeling began with the NG60 group at IEEE, followed by contributions to IEEE 802.11ay. Since 2013, I have been a regular participant, primarily contributing to TGay, UWB, and THz activities. My work has included conducting measurements and ray-tracing propagation simulations across microwave, mmWave, and THz frequencies to analyze and compare propagation effects for broadband communication systems, supporting both IEEE and 3GPP efforts.

 

I am eager to further deepen my engagement and contributions within the IEEE 802.11 framework through this role.

 

Cheers and Greetings,

 

Robert

 

Von: *** IEEE STDS-802-11 List *** <STDS-802-11@xxxxxxxxxxxxxxxxx> Im Auftrag von Jungnickel, Volker
Gesendet: Donnerstag, 11. September 2025 22:11
An: STDS-802-11@xxxxxxxxxxxxxxxxx
Betreff: [EXTERN] [STDS-802-11] Unified Channel Model (UCM) TIG: Call for the Nomination of Vice Chair(s)/Editor(s)/Secretary

 

--- This message came from the IEEE 802.11 Working Group Reflector ---

Dear 802.11 participants,

With this second email, I am calling for the nomination of Vice Chair(s), Editor(s) of the report (or parts in it) and a Recording Secretary for the UCM TIG.

Please, reply to this email with a self-nomination, or the nomination of a colleague, including a short introduction of the candidate. There will be an opportunity to introduce all candidates to the group with Q&A.  

 

If there is an issue or you have any concern, please, contact me. I am happy to help you.

 

Best regards,
Volker

 

Von: *** IEEE STDS-802-11 List *** <STDS-802-11@xxxxxxxxxxxxxxxxx> Im Auftrag von Stacey, Robert
Gesendet: Donnerstag, 11. September 2025 16:47
An: STDS-802-11@xxxxxxxxxxxxxxxxx
Betreff: [STDS-802-11] Unified Channel Model (UCM) TIG

 

--- This message came from the IEEE 802.11 Working Group Reflector ---

Dear Members,

 

At the July session we approved the formation of the Unified Channel Model (UCM) TIG. I have appointed Volker Jungnickel as the chair of this TIG.

 

The UCM TIG charter is to discuss use cases and requirements, develop a Unified Channel Model (UCM) and enable performance comparison of proposals for multilink operation (MLO) across sub‑7 GHz / mm-wave / optical bands. The goal of the UCM TIG is to deliver a channel model that is spatially consistent across sub-7 GHz / mm-wave / optical bands, builds on already available and verified models, can be implemented using open software, and is well documented.

 

At the September session, the UCM TIG will meet

Tue EVE

Thu AM2

 

I understand that Volker already has a number of presentations lined up.

 

-Robert

 

To unsubscribe from the STDS-802-11 list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11&A=1

To unsubscribe from the STDS-802-11 list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11&A=1

To unsubscribe from the STDS-802-11 list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11&A=1