Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[802.3_B400G] IEEE P802.3df/D2.1 400 Gb/s and 800 Gb/s Ethernet Working Group 1st RECIRCULATION ballot



Title: IEEE P802.3df/D2.1 400 Gb/s and 800 Gb/s Ethernet Working Group 1st RECIRCULATION ballot

Dear Colleagues,

Dear IEEE P802.3df Task Force Participants,

With this e-mail, I'd like to announce the start of the IEEE P802.3df/D2.1 400 Gb/s and 800 Gb/s Ethernet Working Group 1st recirculation ballot.

Open date: Friday 9th June 2023

Close date: Saturday 24th June 2023 23:59 AOE

As stated in the announcement below, the ballot group for this draft is the IEEE 802.3 voting membership as of Friday 17th March 2023. All comments received before the close of ballot will be considered, the one limitation however is that if you are not a member of the balloting group, and therefore cannot cast a ballot, you cannot designate comments as TR or ER since you cannot cast a Disapprove ballot.

Best regards,

John D'Ambrosia

Chair, IEEE P802.3df 400 Gb/s and 800 Gb/s Ethernet Task Force 

-----

This is the announcement of the electronic IEEE 802.3 Working Group 1st recirculation ballot on the Amendment IEEE P802.3df 400 Gb/s and 800 Gb/s Ethernet. Remember that voting, as well as attendance, is a requirement to maintain your IEEE 802.3 member (voter) status <http://ieee802.org/3/rules/member.html#DOT3>. Instructions for accessing the draft, casting your ballot and submitting comments follow this announcement. Please review the commenting instructions below to ensure you are using the most up to date tools.

The ballot group for this draft is the IEEE 802.3 voting membership as of Friday 17th March 2023.

Because this is a recirculation ballot, YOU ONLY NEED TO CAST A BALLOT IF YOU WISH TO CHANGE YOUR VOTE FROM THAT WHICH WAS RECORDED ON THE INITIAL BALLOT OR LAST RECIRCULATION. If you voted previously and your vote has not changed, the last ballot cast will be carried over to this ballot and you do not need to cast a new ballot.

BALLOT SCOPE:

During this IEEE 802.3 Working Group 1st recirculation ballot, the scope of the ballot is the substantive changes between IEEE P802.3df/D2.0 and IEEE P802.3df/D2.1 and the unsatisfied negative comments.

CRITERIA FOR STANDARDS DEVELOPMENT:

One of the responsibilities as a balloter is to ensure that draft is consistent with the criteria for standards development (CSD) responses which are available at <https://mentor.ieee.org/802-ec/dcn/21/ec-21-0306-01-ACSD-p802-3df.pdf>. An Approve vote indicates your agreement that the draft is consistent with the CSD responses.

BALLOT OPEN:

Friday 9th June 2023

BALLOT CLOSE:

Saturday 24th June 2023 23:59 AOE

The Project Authorization Request for this Amendment is available at <https://ieee802.org/3/df/proj_doc/P802.3df_031222.pdf> and includes the following:

TITLE:

Standard for Ethernet Amendment: Media Access Control Parameters for 800 Gb/s and Physical Layers and Management Parameters for 400 Gb/s and 800 Gb/s Operation

SCOPE OF PROJECT:

Define Ethernet MAC parameters, physical layer specifications, and management parameters for the transfer of Ethernet format frames at 800 Gb/s over copper, multi-mode fiber, and single-mode fiber physical medium dependent (PMD) sublayers based on 100 Gb/s per lane signaling technology.

Using these new definitions for 800 Gb/s, define physical layer specifications and management parameters for the transfer of Ethernet format frames at 400 Gb/s.

NEED FOR THE PROJECT:

The project is necessary to provide solutions to meet the growing bandwidth needs for computing and network interconnect application areas, such as cloud-scale data centers, internet exchanges, co-location services, content delivery networks, wireless infrastructure, service provider and operator networks, and video distribution infrastructure.

Thank you for your participation in this ballot and careful review of the draft.

David Law

Chair, IEEE 802.3 Ethernet Working Group

Phone: +44 1631 563729

Email: david_law@xxxxxxxx

John D'Ambrosia

Chair, IEEE P802.3df 400 Gb/s and 800 Gb/s Ethernet Task Force

Phone: +1 717 503 4512

Email: jdambrosia@xxxxxxxx

----------------------------------------------------------------

INSTRUCTIONS FOR BALLOTING ON: IEEE P802.3df draft D2.1

Instructions for accessing the ballot documents, casting your ballot and submitting comments follow.

HOW TO ACCESS THE DRAFT

The draft is posted for your review for balloting purposes only, and neither the draft nor access information should be copied or redistributed to others in violation of document copyrights.

The IEEE P802.3df 400 Gb/s and 800 Gb/s Ethernet draft D2.1 may be downloaded from:

URL: <https://www.ieee802.org/3/df/private/8023df_D2p1.pdf>

Username: [IEEE 802.3 or IEEE 802.3df username]

Password: [IEEE 802.3 or IEEE 802.3df password]

Please submit comments against the above draft.

A comparison file between IEEE P802.3df 400 Gb/s and 800 Gb/s Ethernet draft D2.0 and D2.1 is also provided to both focus and ease your review. Please DO NOT comment on this comparison document. This draft may be downloaded from:

<https://www.ieee802.org/3/df/private/8023df_D2p1_compare.pdf>

Please DO NOT submit comments against the above document.

Unsatisfied negative comments, and their dispositions may be downloaded from:

<https://www.ieee802.org/3/df/comments/D2p0/8023df_D2p0_comments_unsatisfied_clause.pdf>

All comments, and their dispositions, from the initial ballot may be downloaded from:

<https://www.ieee802.org/3/df/comments/D2p0/8023df_D2p0_comments_final_clause.pdf>

These documents are posted in Adobe "pdf" document format and can be downloaded and printed if desired. If you do not have Adobe Acrobat Reader, it is available for free downloading from:

<http://www.adobe.com/prodindex/acrobat/readstep.html>


HOW TO CAST YOUR BALLOT

To assure your ballot is counted, please:

1) Send your ballot to: stds-802-3-ballot@xxxxxxxx

2) Paste the following line into the subject field:

IEEE P802.3df 400 Gb/s and 800 Gb/s Ethernet D2.1 ballot

       

This can be done with this link <mailto:stds-802-3-ballot@xxxxxxxx?subject=IEEE%20P802.3df%20400%20Gb/s%20and%20800%20Gb/s%20Ethernet%20D2.1%20ballot>

3) Paste into the message body and complete the ballot form below:

-----CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE--------

IEEE P802.3df 400 Gb/s and 800 Gb/s Ethernet D2.1 ballot

Your Name:___________________________

 

 

 ___ APPROVE ALL WITHOUT COMMENT

 

 ___ APPROVE ALL WITH COMMENTS on SOME

       (All comments are non-binding)

 

 ___ DISAPPROVE

       (Some or all comments are binding; a voter must submit specific comments for remedy)

 

 ___ ABSTAIN, Lack of Expertise

 

 ___ ABSTAIN, Lack of Time

 

 

-----------------------end ballot form--------------------

HOW TO SUBMIT COMMENTS

Acceptable comment types:

E = Editorial

ER = Editorial Required (a binding comment that is part of a DISAPPROVE vote, therefore only appropriate for an IEEE 802.3 voting member) T = Technical TR = Technical Required (a binding comment that is part of a DISAPPROVE vote, therefore only appropriate for an IEEE 802.3 voting member)

1. Prepare your comments in one of the following two ways. You are STRONGLY REQUESTED to use the spreadsheet. A comment entry tutorial is available at:

<http://ieee802.org/3/ballots/p802d3_comment_entry_tutorial.pdf>

a. Access the comment spreadsheet at the URL:

<http://www.ieee802.org/3/WG_tools/spreadsheet/802d3_TFR_WGB_comments.xls>

b. To submit comments in text (ASCII) form, please use the form below. This will make it possible for the editor to properly record and track all submissions. Make as many copies of the template as necessary and submit as an ASCII text file or as part of your e-mail.

PLEASE NOTE: The ASCII method involves a manual transcription; hence you are recommended to check your comments to ensure accurate transcription when the comment file is made available. Please use one of the comment tools above if possible.

The IEEE SA Balloting and Comment Resolution Process Guidelines (see <https://standards-dev21.ieee.org/wp-content/uploads/import/governance/revcom/guidelines.pdf>) provides direction on submission of comments during the balloting process and describes appropriate responses from the Comment Resolution Group (CRG). Commenters are encouraged to familiarise themselves with this document.

 

 ------CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE--------

 CommentID: (Leave Blank)

 CommenterName:

 CommenterCompany:

 Clause:

 Subclause:

 Page:

 Line:

 CommentType: (E, ER, T, or TR)

 Comment:

 CommentEnd:

 SuggestedRemedy:

 RemedyEnd:

 --------------------end comment template------------------

2. Send your comments to: stds-802-3-ballot@xxxxxxxx and paste into the subject line:

IEEE P802.3df 400 Gb/s and 800 Gb/s Ethernet D2.1 comments

This can be done with this link <mailto:stds-802-3-ballot@xxxxxxxx?subject=IEEE%20P802.3df%20400%20Gb/s%20and%20800%20Gb/s%20Ethernet%20D2.1%20comments>


To unsubscribe from the STDS-802-3-B400G list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-B400G&A=1