[802.3_RTPGE] Reminder: [802.3_RTPGE] Channel definitions ad hoc

Thread Links	Date Links
Thread Prev	Thread Next	Thread Index	Date Prev	Date Next	Date Index

In a message dated 5/1/2014 10:42:03 A.M. Eastern Daylight Time, CDimi80749@xxxxxxx writes:

Colleagues,

Agenda May 1

1)Review patent policy

2)Review April 17 minutes

3)Continuation of closing action items for optional link segment (fill-in TBD's), complete balance and alien crosstalk Annex's and test fixture specifications.

- Review alien crosstalk annex-discussion document.pdf - Chris DiMinico

- Review Annex98Draft0.3-ckd.pdf balance test procedure - Curtis Donahue

-Review 802.3bp optional link segment baseline-0.6.pdf - Chris DiMinico

Discussion: I've had discussions with primary phy contributors to the 802.3bp phy specifications regarding the optional link specifications. All of them have indicated that RL is the key parameter to consider.

On the basis that further agreements on phy characteristics during and immediately following May Interim will enable RL considerations with more specificity of applicable phy specifications. I've decided to hold-off trying to close optional link segment proposal till after May IEEE Interim .

In the meantime, I'm planning to provide the phy ad hoc with optional link measurements, including balance and coupling attenuation characterization.

Minutes April 17

1)Reviewed patent policy

2)Reviewed April 3 minutes

3)Discussions on continuation of closing action items for Annex's and test fixture specifications.

Regards, Chris

In a message dated 4/24/2014 7:32:50 A.M. Eastern Daylight Time, CDimi80749@xxxxxxx writes:

Colleagues,

Waiting for material to fill-in the annexes for balance and alien crosstalk. Rescheduling tomorrows meeting to next week May 1st 8 AM PST. I sent the notice out yesterday but the reflector seems to be working or not intermittently.

Regards, Chris

In a message dated 4/23/2014 8:22:26 P.M. Eastern Daylight Time, CDimi80749@xxxxxxx writes:

Colleagues,

Waiting for material to fill-in the annexes for balance and alien crosstalk. Rescheduling tomorrows meeting to next week May 1st 8 AM PST.

Regards, Chris

In a message dated 4/21/2014 9:06:54 P.M. Eastern Daylight Time, CDimi80749@xxxxxxx writes:

Colleagues,

Please find attached an update of the optional link specification proposal based on comments received (presented in 802.3bp optional link segment baseline-0.5.pdf). I'm still reviewing a number of comments on return loss and balance but would like to continue review based on suggested changes towards building a consensus.

Regards, Chris

In a message dated 4/16/2014 10:16:47 P.M. Eastern Daylight Time, CDimi80749@xxxxxxx writes:

Colleagues,

Agenda April 17

1)Review patent policy

2)Review April 3 minutes

3)Continuation of closing action items for optional link segment (fill-in TBD's), complete balance and alien crosstalk Annex's and test fixture specifications.

- Review 802.3bp optional link segment baseline-0.5.pdf - Chris DiMinico

- Balance measurements of prototype Cat 8 cable - Wayne Hopkinson/ CommScope

Minutes April 3

1)Reviewed patent policy

2)Review March 19 minutes

3)Continuation of closing action items for Annex's and test fixture specifications.

- Link segment balance test procedures (Annex)-UNH-IOL: Curtis Donahue first draft March 19

---3-port balance measurement - Broadcom

Regards, Chris

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++

1. Please join my meeting.
https://global.gotomeeting.com/join/904357701

2. Use your microphone and speakers (VoIP) - a headset is recommended. Or, call in using your telephone.

Dial +1 (630) 869-1015
Access Code: 904-357-701
Audio PIN: Shown after joining the meeting

Meeting ID: 904-357-701

GoToMeeting®
Online Meetings Made Easy®

Not at your computer? Click the link to join this meeting from your iPhone®, iPad®, Android® or Windows Phone® device via the GoToMeeting app.

[802.3_RTPGE] Reminder: [802.3_RTPGE] Channel definitions ad hoc - June 5 - 8 AM PST