Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [802.3_SPEP2P] Request to pull comments ID3, ID4 and ID149 from the EZ bucket

We will pull these. For background, on another amendment, I believe we discovered that ieee sa mandated either dc or DC. We should be consistent. If that is right, the change will ripple through the base standard as well when we do the revision.

I'll see if I can find the comment from 802.3da to reference for the discussion.
Sent from my iPhone

On Nov 6, 2025, at 9:57 AM, Murray, Brian <00004c7ebd701497-dmarc-request@xxxxxxxxxxxxxxxxx> wrote:


George

1/ ID3 and ID4

Can we remove Comment ID3 and ID4 from the EZ bucket; "dc" should be "DC"

Some of these are requested changes to draft 2.1 but also are changes to existing text in 802.3 2022 (clause 104). 
This will result in inconsistency and we don't want a mix of 'dc' or 'DC' within a Table or text in the same paragraph in clause 104, which uses 'dc' everywhere.
I don't believe there is universal agreement on the use of 'dc' or 'DC'.

So I think needs some discussion. 

2/ ID149
Can we remove Comment ID149 from the EZ bucket; "Typo in bit numbering for mr_ds_period_restart"

The correct bit numbering is 7.531.15:8.
So yes it is still an EZ comment, but the proposed solution is not correct. So should be rejected.

This is a duplicate of ID61 - which is correct.

Thanks
Brian





To unsubscribe from the STDS-802-3-SPEP2P list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-SPEP2P&A=1

To unsubscribe from the STDS-802-3-SPEP2P list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-SPEP2P&A=1