Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[802.3_SPEP2P] update on why we do transmit power & PSD as leader



It didn’t take me long to remember why this test is specified for when the transmitter is in leader mode – LEADER/FOLLOWER for the PMA (and this is a PMA test) is about how the clock is generated.  If you tried to do these tests with the PMA in FOLLOWER, you would need to have a link partner up on the line.  That would make the power and PSD measurement difficult, because you’d have the link partner’s signal superimposed on the DUT’s.

 

George Zimmerman, Ph.D.

President & Principal

CME Consulting, Inc.

Experts in Advanced PHYsical Communications

george@xxxxxxxxxxxxxxxxxxxx

310-920-3860

 


To unsubscribe from the STDS-802-3-SPEP2P list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-SPEP2P&A=1