|
Mike,
Most people use
Matlab, some DSL simulation code for which is available at:
If you want to run
spectral compatibility calculations, try the Telcordia Spectral Compatibility
Computer at:
net3.argreenhouse.com
I can give you a
free login if you want one.
Ken
Kerpez
Telcordia
Technologies
RRC-1N327
One Telcordia
Drive
Piscataway, NJ
08854-4157
Phone: 732
699-2234
Fax: 732
336-7013
kkerpez@telcordia.com
Greetings from sunny South Africa
!
We
have an engineering student that we would like to keep busy. What
would be the best ( open source / commercial but available for academic use
) simulator for him to set up and play with ? Our
interest is VDSL over copper.
Please reply direct to mikeb@bcnkbroadband.co.za if your
comments are off-the-subject for this forum or just plain
commercial ...
thanks,
mike barker
Hi,
As
Spirent has several different VDSL wireline simulator and noise impairment
systems used throughout the xDSL industry, we would be happy to consider a
loan of a simulator system to a test group managed by the IEEE, for a
period of time, to help validate the various tables if this would be of
assistance to the IEEE and development of the EFM-Copper
standard.
If there is interest please have have whoever is going to validate these tables
contact me directly to discuss further.
Best Regards
Steve Courtney, VP Marketing and Product
Management
Performance Analysis - Access Emulation
Spirent
Communications,
750 Palladium
Drive,
Ottawa,
Ontario,
Canada K2V
1C7
Office Tel. +1 613 592 2661,
ext. 4317
Mobile +1 613 220
7525
Fax +1 613 592
0522
Email:
stephen.courtney@spirentcom.com
Product Information
http://ae.spirentcom.com
-----Original Message-----
From:
O'Mahony, Barry [mailto:barry.omahony@intel.com]
Sent: Monday,
October 20, 2003 2:50 PM
To:
stds-802-3-efm-copper@ieee.org
Subject: [EFM-Copper]
FSAN/Telia/FTW simulator tool
http://xdsl.ftw.at/xdslsimu/index.html
'haven't looked closely at
this, but it is publicly-available freeware.
As such, perhaps it would be
appropriate to use as the basis for the simulator(s) to be used to
validate Table 62B-1.
--Barry
|