Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [802.3_NGEPON] IEEE 802.3ca D1.6 posted - Comment Period open until May 6, 2019



Hello all,

 

This is a friendly reminder that the comment period for Draft 1.6 will close on May 6, 2019. Please see below for details around obtaining the draft as well as submitting comments.

 

Curtis

 

 

From: Curtis Knittle <C.Knittle@xxxxxxxxxxxxx>
Sent: Monday, March 25, 2019 4:41 AM
To: STDS-802-3-NGEPON@xxxxxxxxxxxxxxxxx
Subject: [802.3_NGEPON] IEEE 802.3ca D1.6 posted - Comment Period open until May 6, 2019

 

 

Dear Colleagues,

 

The P802.3ca Draft 1.6 (D1.6) is posted and available for your review and comments. D1.6 is accessible via the 802.3ca project folder:

http://www.ieee802.org/3/ca/index.shtml

 

Since this draft is being sent for Working Group (WG) preview, commenters should use their judgment regarding which issues are critical enough to be fixed immediately (before the start of the WG ballot) and which issues can be corrected during the WG ballot phase. Note that every change to the draft between D1.6 and D2.0 will need to be presented and explained to the WG during the closing meeting. If too many changes are made, this could delay approval to go to WG ballot.

 

The IEEE P802.3ca Task Force Review period will end on May 6, 2019. Please comment using the CLEAN version of D1.6. To submit comments against the draft, refer to the instructions located here:

http://www.ieee802.org/3/ca/3ca_commentproc.shtml

 

 

Curtis

 

 

 

 

Curtis Knittle

VP Wired Technologies – R&D

CableLabs

desk: +1-303-661-3851

mobile: +1-303-589-6869

c.knittle@xxxxxxxxxxxxx

 

Stay up to date with CableLabs: Read the blog and follow us on Twitter

#whosaysicant

 

 


To unsubscribe from the STDS-802-3-NGEPON list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-NGEPON&A=1


To unsubscribe from the STDS-802-3-NGEPON list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-NGEPON&A=1