| 
Hi Bo,                   After some off-line discussions with others, I would like to Defer Straw Poll #2 listed below.  Thanks.   Regards, Steve   
From: Steve Shellhammer <00002a5699263b15-dmarc-request@xxxxxxxxxxxxxxxxx>
Sent: Wednesday, September 11, 2024 8:12 PM
 To: STDS-802-11-TGBP@xxxxxxxxxxxxxxxxx
 Subject: [STDS-802-11-TGBP] Straw Polls for TGbp
   WARNING:
 This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros. 
Hi Bo,                   Please add the following Straw Polls to the list.   Regards, Steve   Straw Poll #1 
Do you agree to add following content to sub-clause 4 of SFD: 
IEEE 802.11bp will specify, in 2.4 GHz, an AMP Downlink PPDU containing at least an 802.11 preamble field, an AMP-Sync field and an AMP-Data field. Inclusion of an AMP-SIG
 field is TBD. 
The details of the 802.11 preamble field are TBD.Additionally, for transmission to backscatter STAs there will be one or more Excitation fieldsAdditionally, for transmission to backscatter STAs there may be more than one AMP-Data field 
Additionally, AMP-Sync and AMP-SIG field may precede each AMP-Data field 
Name of this Downlink PPDU is TBD.     Straw Poll #2 
Do you agree to add following content to sub-clause 4 of SFD: 
IEEE 802.11bp will specify an AMP Downlink PPDU with an AMP-Sync field with duration less than 64 µs 
The AMP-Sync field design is TBD.Note: the duration of the 802.11ba HDR Sync field is 64 µs
     Straw Poll #3 
Do you agree to add following content to sub-clause 4 of SFD: 
The AMP Downlink PPDU AMP-Sync field and the AMP-Data field will use On-Off Keying (OOK) modulation     Straw Poll #4 
Do you agree to add following content to sub-clause 4 of SFD: 
The AMP Downlink PPDU AMP-Data field will use Manchester encoding for non-backscatter operation. 
For the Backscatter case, the AMP-Data field encoding scheme is TBD.     Straw Poll #5 (For Information Collection (Not for SFD)) 
For the AMP Downlink PPDU evaluation simulations which multipath channel model should be used?   
Channel Model BChannel Model DAbstain     
 
 To unsubscribe from the STDS-802-11-TGBP list, click the following link: 
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1  
  To unsubscribe from the STDS-802-11-TGBP list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1  |