Hi Bo,
Please add the following the SPs in the agenda:
- Do you agree to add the following to 11bp SFD?
- The Excitation subfield before AMP-SYNC in DL PPDU (for mono-static backscattering operation) is named as WUP-Excitation
- The Excitation subfield after AMP-Data in DL PPDU (for backscattering operation) is named as BST-Excitation
- Do you agree to add the following to 11bp SFD?
- The WUP-Excitation subfield shall have a duration of at least 1 milli-second
- Applies to both 2.4GHz and Sub-1GHz operation
- Do you agree to add the following to 11bp SFD?
- The BST-Excitation subfield shall have a duration of at least 16 micro-second for 2.4 GHz operation
- Do you agree to add the following to 11bp SFD?
- The immediate response time is 16us with +/-20% inaccuracy for mono-static backscattering AMP non-AP STA in 2.4GHz
Thanks,
Rui
From: sun.bo1@xxxxxxxxxxxxxxxx <sun.bo1@xxxxxxxxxxxxxxxx>
Sent: Wednesday, January 14, 2026 2:07 PM
To: STDS-802-11-TGBP@xxxxxxxxxxxxxxxxx
Subject: [EXT] [STDS-802-11-TGBP] call for Straw Poll requests
|
Caution: This is an external email. Please take care when clicking links or opening attachments. When in doubt, report the message using the 'Report this email' button
|
Though we still have two meetings in this week, most PDT proposals and tech contributions have been presented and discussed in past meetings. Therefore I'm calling
for Straw Polls which will be conducted in the 2nd half of AM1 and 1st half of PM1 on Thursday.
-
there's only 5 minutes allocated for each PDT SP since it's believed that those PDT proposals have been well discussed offline among TTT members and the TTT has come to certain consensus
on those PDT proposals.
-
each of the the requested SFD SPs is allocated 5 mins in principle. The SP owner is encouraged to reach out to members and harmonize the SP text offline, especially with those members raising
comments or questions during the contribution presentation.
-
each SP request should clearly indicate whether it's a SFD SP, a PDT SP or just for information collection. A SFD SP request and a PDT SP request should also clearly include the DCNs of
reference documents.
BTW, those SP requests that have been sent to the reflector are identified and they don't need to be sent to the reflector again after this email.
To unsubscribe from the STDS-802-11-TGBP list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1
To unsubscribe from the STDS-802-11-TGBP list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1
|