Bo and Yinan,
Please advise for the Table below for the AMP-Excitation Field if we should reference TBD or a specific subclause. I will update the PDT based on your recommendation.
Thanks,
Steve
From: Steve Shellhammer <00002a5699263b15-dmarc-request@xxxxxxxxxxxxxxxxx>
Sent: Wednesday, January 14, 2026 12:35 PM
To: STDS-802-11-TGBP@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBP] PDT AMP 2.4 GHz Downlink PPDU Format Update
WARNING:
This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros.
Yinan,
On Monday, Bo suggested we have a subclause for the Excitation Field, since we are approaching letter ballot. I am fine with either way but we need an agreement so we can approve the PDT.
Regards,
Steve
From:
亓祎男 <v-qiyinan@xxxxxxxx>
Sent: Wednesday, January 14, 2026 12:23 PM
To: Steve Shellhammer <sshellha@xxxxxxxxxxxxxxxx>
Subject: 回复: PDT AMP 2.4 GHz Downlink PPDU Format Update
WARNING:
This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros.
Hi Steve,
I checked the table, It seems the referred subclause index in the table needs to be updated according to D0.2. Excitation is still TBD.
Br,
Yinan
发件人:
Steve Shellhammer <sshellha@xxxxxxxxxxxxxxxx>
发送时间: 2026年1月14日 20:10
收件人: 亓祎男 <v-qiyinan@xxxxxxxx>;
STDS-802-11-TGBP@xxxxxxxxxxxxxxxxx
主题: RE: PDT AMP 2.4 GHz Downlink PPDU Format Update
Yinian,
Thanks, will do. Is the Excitation Field still in 40.3.8.2.2, or another subclause?
Regards,
Steve
From:
亓祎男 <v-qiyinan@xxxxxxxx>
Sent: Wednesday, January 14, 2026 11:49 AM
To: Steve Shellhammer <sshellha@xxxxxxxxxxxxxxxx>;
STDS-802-11-TGBP@xxxxxxxxxxxxxxxxx
Subject: 回复: PDT AMP 2.4 GHz Downlink PPDU Format
Update
WARNING:
This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros.
Hi Steve,
Two editorial comments for the table. AMP-sync should refer to 40.3.8.2.1 and AMP-sig can refer to 40.3.8.2.2.
Br,
Yinan
发件人:
Steve Shellhammer <00002a5699263b15-dmarc-request@xxxxxxxxxxxxxxxxx>
发送时间: 2026年1月14日 19:27
收件人:
STDS-802-11-TGBP@xxxxxxxxxxxxxxxxx
主题: Re: [STDS-802-11-TGBP] PDT AMP 2.4 GHz Downlink PPDU Format Update
Hi Bo,
I made a few edits to the PDT based on feedback received during this morning meeting.
I believe the following PDT is ready for Straw Poll.
PDT AMP 2.4 GHz Downlink PPDU Format Update (document 11-26/112r4)
Regards,
Steve
To unsubscribe from the STDS-802-11-TGBP list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1
To unsubscribe from the STDS-802-11-TGBP list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1
To unsubscribe from the STDS-802-11-TGBP list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1