|
Hi Bo,
Please update SP1 of MAC SP set #18 as follows for the upcoming TC (red texts are new):
-
When UL access information is present in the SP Advert frame,
for the Active Tx non-AP AMP STA that supports AMP SP operation,
N sets of SP parameters shall be derived through the configured one set of SP parameters in the SP Advert frame, where N is the number of sub-groups derived from SP ID.
-
The N sets of SP parameters share the same configured SP Interval, and SP Minimum Wake Duration of the configured one set of SP parameters, but have individual SP Start Time.
-
The SP Start Time of nth set of SP parameters is determined by the equation:
-
SP Start Time(n)= SP Start Time + n*(SP Interval/N), n=[0,N-1], where SP Start Time belongs to the configured one set of SP parameters in the SP Advert frame.
Thanks,
Sam
To unsubscribe from the STDS-802-11-TGBP list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1
|