Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-11-TGBP] SP update request

Hi Bo

Please help schedule presentation of the contribution

    • 11-25/2236, Envelope Detector Fundamentals for AMP, Dror Regev (Huawei)

For Feb. 10th

Thanks in advance

Dror

 

From: Sam Shi <Sam.Shi@xxxxxxxxxxxxxxxx>
Sent: Saturday, February 7, 2026 1:30 AM
To: STDS-802-11-TGBP@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGBP] SP update request

 

Hi Bo,

 

Please update SP1 of  MAC SP set #18 as follows for the upcoming TC (red texts are new):

 

  • When UL access information is present in the SP Advert frame, for the Active Tx non-AP AMP STA that supports AMP SP operation, N sets of SP parameters shall be derived through the configured one set of SP parameters in the SP Advert frame, where N is the number of sub-groups derived from SP ID.
  • The N sets of SP parameters share the same configured SP Interval, and SP Minimum Wake Duration of the configured one set of SP parameters, but have individual SP Start Time.
  • The SP Start Time  of nth set of SP parameters is determined by the equation:
    • SP Start Time(n)= SP Start Time + n*(SP Interval/N), n=[0,N-1], where SP Start Time belongs to the configured one set of SP parameters in the SP Advert frame.

 

Thanks,

Sam

 

To unsubscribe from the STDS-802-11-TGBP list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1

To unsubscribe from the STDS-802-11-TGBP list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1