|
Hi all,
Echo to Bo's request, please let me know your comments, if any, to the following SP's scheduled on next TC's
SP 1 of MAC SP set #18
SP #1: Do you agree to add the following text into the 11bp SFD ? [Postponed to Mar 12th ; Jan 15th 2026, AM1; updated on Mar 20, 2026]
-
When UL access information is present in the SP Advert frame,
for the Active Tx non-AP AMP STA that supports AMP SP operation, N sets of SP parameters shall be derived through the configured one set of SP parameters in the SP Advert frame, where N is the number of sub-groups derived from SP ID,
when the SP ID has a value greater than 1.
-
The N sets of SP parameters share the same configured SP Interval, and SP Minimum Wake Duration of the configured one set of SP parameters, but have individual SP Start Time.
-
The SP Start Time of nth set of SP parameters is determined by the equation:
-
SP Start Time(n)= SP Start Time + n*(SP Interval/N), n=[0,N-1], where SP Start Time belongs to the configured one set of SP parameters in the SP Advert frame.
[Reference: 11-24/1775r0, 11-25/0032r0, 11-25/0813r0, 11-25/1252r0, 11-25/1581r0, 11-25/2093r0]
SP1 of MAC SP set #24
SP #1: Do you agree to add the following text into the 11bp SFD ? [Postponed to Apr 14; AM1, Mar 12; Mar plenary, 2026; updated on Mar 24]
-
11bp supports communication between the AMP AP and STAs
that without requiring previous frame exchange
a discovery and/or association phase.
-
An AMP DL
PPDUframe with UL access information. -
An AMP UL
PPDUframe with UL response. -
An AMP DL Ack acknowledges that the AMP UL
PPDUframe was successfully received.
-
There is no Ack if the AMP UL
PPDUframe was not received.
-
Note:
-
Whether security is applied to the UL response is TBD.
-
Content of the UL response is TBD.
-
The above does not apply to mono-static backscatter non-AP AMP STAs.
[Reference: 11-26/0605r1]
Thanks,
Sam
To unsubscribe from the STDS-802-11-TGBP list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1
|