|
Hi Bo,
Can you update SP1 of MAC SP set #18 as follows for the Apr 21 TC?
SP #1: Do you agree to add the following text into the 11bp SFD ?
-
When UL access information
and SP Parameters are is present in the SP Advert frame,
and the SP ID has a value greater than 1, for the Active Tx non-AP AMP STA that supports AMP SP operation, N sets of SP parameters shall be derived through the configured one set of SP parameters in the SP
Advert frame, where N is the number of sub-groups derived from SP ID,
when the SP ID has a value greater than 1.
-
The N sets of SP parameters share the same configured SP Interval, and SP Minimum Wake Duration of the configured one set of SP parameters, but have individual SP Start Time.
-
The SP Start Time of nth set of SP parameters is determined by the equation:
-
SP Start Time(n)= SP Start Time + n*(SP Interval/N), n=[0,N-1], where SP Start Time belongs to the configured one set of SP parameters in the SP Advert frame.
[Reference: 11-24/1775r0, 11-25/0032r0, 11-25/0813r0, 11-25/1252r0, 11-25/1581r0, 11-25/2093r0]
Thanks,
Sam
To unsubscribe from the STDS-802-11-TGBP list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1
|