From: Nelson Costa <nelson@xxxxxxxx>
Date: Wednesday, 16 September 2026 at 22:19
To: STDS-802-11-TGBP@xxxxxxxxxxxxxxxxx <STDS-802-11-TGBP@xxxxxxxxxxxxxxxxx>
Subject: Re: [STDS-802-11-TGBP] PDT: Transmit and receiver specification TBDs.
Hi all,
Here is the latest version of the Transmit and Receiver specification TBDs. I've tried to address all comments.
Cheers,
Nelson.
Hello Nelson,
Some comments on 1542:
-
We suggest to change the tables values as follows:
Table 40-11—DL receiver minimum input level sensitivity for
non-backscatter and bistatic backscatter active TX receivers
|
AMP-DL-MCS index
|
Modulation
|
Data Rate (kb/s)
|
Minimum sensitivity (dBm)[N1]
|
|
0
|
AMP MC-OOK
|
250
|
TBD
-81
-35
|
|
1
|
AMP MC-OOK
|
1000
|
TBD
-78
-25
|
Table 40-14—UL receiver minimum input level sensitivity for active Tx
|
AMP-UL-AT-MCS index
AMP-UL-AT-MCS index
|
Modulation
|
Rate (R)
|
Data Rate (kb/s)
|
Minimum sensitivity (dBm)[N2]
|
|
0
|
AMP MC-OOK
|
1/2
|
250
|
TBD
-94
-84
|
|
1
|
AMP MC-OOK
|
1/2
|
1000
|
TBD
-88
-78
|
|
2
|
AMP MC-OOK
|
1
|
4000
|
TBD
-78
-68
|
-
Further we suggest to remove the maximum sensitivity requirement for the
active TX DL receivers:
For non-backscatter and bistatic backscatter, the receiver shall provide a maximum PER of 10% at a PSDU length of 20 octets for all MCSs, for a maximum input level of -20 dBm in the 2.4 GHz band, measured at each physical antenna port for any baseband
AMP modulation.
Best Regards,
Amichai
To unsubscribe from the STDS-802-11-TGBP list, click the following link: https://protect.checkpoint.com/v2/r01/___https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1___.YzJ1OndpbGlvdDI6YzpvOjdkMTk3N2JmYmUwY2U4MjZjZWEzMjM5MTY1NDdmM2QzOjc6YmUyMTo0ZTdkOTJjOWE3OWUyYjhlYmY0ZjNhZDAwZmUxMDk4MDllZDA0ODQ5MDRhMjQyMDE4NDcxODFkYWM3YzNmNjUwOnQ6VDpG