Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[STDS-802-11-TGBQ] 回复: [EXT] Re: [STDS-802-11-TGBQ] Motion Request



Hi Edward,

 

Please add the following two motions into the motion list:

 

Move to add the following to the 11bq SFD:  

  • The tone spacing for the M-LTF and SIG in the M-Preamble is 1.25MHz.

SP result: No objection

supporting documents: 11-26/916r1, 11-26/869r0

 

 

Move to add the following to the 11bq SFD:  

  • The tone plan is the same for the M-LTF & SIG in the M-preamble.

SP result: No objection

supporting documents: 11-26/916r1, 11-26/869r0.

 

Thanks,

 

BR
Jiqing

OPPO

 

发件人: Rui Cao <rui.cao_2@xxxxxxx>
发送时间: 2026513 17:50
收件人: STDS-802-11-TGBQ@xxxxxxxxxxxxxxxxx
主题: Re: [STDS-802-11-TGBQ] [EXT] Re: [STDS-802-11-TGBQ] Motion Request

 

外部邮件/External Mail

 

Hi Edward,

 

Please add the following two motions to the motion list:

 

Move to add the following text to the 11bq SFD:  

  • The M-LTF and SIG subfield of 320 MHz PPDU is defined as four times duplication of VHT 20MHz tone plan
  • The 320MHz loaded tones are shown in the following table

Num. of tone Shift

Loaded tones

Pilots

VHT 20MHz

[-28:-1, 1:28]

[-21 -7 7 21]

DUP-1

-96

[-124:-97, -95:-68]

[-117 -103 -89 -75]

DUP-2

-32

[-60:-33, -31:-4]

[-53 -39 -25 -11]

DUP-3

+32

[4:31, 33:60]

[11 25 39 53]

DUP-4

+96

[68:95, 97:124]

[75 89 103 117]

 

Supporting documents: [26/927r0, 26/836r0, 26/869r0, 26/839r1, 26/872r1]

SP result: No Objection

 

Move to add the following text to the 11bq SFD:  

  • The M-LTF and SIG subfields of 320MHz IMMW PPDUs apply 8-segment rotation [1 1 1 1 -1 1 1 -1] in frequency domain with each polarity for one 40MHz segment, from negative frequency to positive frequency
  • Note: the phase rotation sequence is the same the one defined in the data portion of UHR ELR PPDU

Supporting documents: [26/927r0, 26/836r0, 26/869r0, 26/839r1, 26/872r1]

SP result: No Objection

 

Thanks,
Rui

 

From: Fang, Juan <juan.fang@xxxxxxxxx>
Sent: Wednesday, May 13, 2026 11:26 AM
To: STDS-802-11-TGBQ@xxxxxxxxxxxxxxxxx
Subject: [EXT] Re: [STDS-802-11-TGBQ] Motion Request

 

Caution: This is an external email. Please take care when clicking links or opening attachments. When in doubt, report the message using the 'Report this email' button

 

Hi Edward,

 

For the motion in 26/869r0, please help to add the following supporting documents:

 

11-26/0778r0, 11-26/0872r1, 11-26/0916r1

 

Thanks,

 

Juan

From: Shengquan Hu <000036fc915e2c29-dmarc-request@xxxxxxxxxxxxxxxxx>
Sent: Wednesday, May 13, 2026 2:18 AM
To: STDS-802-11-TGBQ@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBQ] Motion Request

 

Hi Edward,

 

  For the 4 motions in 26/778r0, please also add the following supporting documents:

 

  26/836r0, 26/869r0,26/927r0, 26/839r1, 26/872r1

 

Thank you,

Shengquan

 

 

From: Lin Yang <00002bbbd565f56a-dmarc-request@xxxxxxxxxxxxxxxxx>
Sent: Wednesday, May 13, 2026 2:01 AM
To: STDS-802-11-TGBQ@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBQ] Motion Request

 

External email : Please do not click links or open attachments until you have verified the sender or the content.

Dear Edward,

For the 4 motions in 26/836r0, please add also the following supporting documents 

26/872r1, 26/0869, 26/0778, 26/0927, 26/0839

 

Thanks,

Lin


From: Edward Au <edward.ks.au@xxxxxxxxx>
Sent: Thursday, April 16, 2026 11:56 AM
To:
STDS-802-11-TGBQ@xxxxxxxxxxxxxxxxx <STDS-802-11-TGBQ@xxxxxxxxxxxxxxxxx>
Subject: Re: [STDS-802-11-TGBQ] Motion Request

 

WARNING: This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros.

Dear Hongwon,

 

Acknowledged with thanks.   I will post revision 14 of the compendium of motions slide deck the next few weeks with your requests, which will be Motions 27 and 28.

 

Regards,

Edward

 

On Tue, Apr 14, 2026 at 8:56 PM hongwon.lee <hongwon.lee@xxxxxxx> wrote:

Dear Edward,

 

Could you please add the following motions to the motion list?

 

Move to add the following text to the 11bq SFD:  

  • 11bq defines new or reuses/enhances existing signaling mechanism(s) in a mmWave link for an IMMW STA to facilitate beam tracking procedure for a mmWave band
    • TBD on using frame or NDP PPDU
    • Details are TBD

* Supporting documents: [26/0478]

SP result: No Objection

 

Move to add the following text to the 11bq SFD:  

  • 11bq defines new frames or reuses/enhances existing frames for exchange over a mmWave link, where an IMMW STA reports the result of beam tracking procedure in the mmWave band
    • Details are TBD

* Supporting documents: [26/0478]

SP result: No Objection

 

Best regards,

Hongwon

 


To unsubscribe from the STDS-802-11-TGBQ list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBQ&A=1


To unsubscribe from the STDS-802-11-TGBQ list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBQ&A=1


To unsubscribe from the STDS-802-11-TGBQ list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBQ&A=1


To unsubscribe from the STDS-802-11-TGBQ list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBQ&A=1


To unsubscribe from the STDS-802-11-TGBQ list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBQ&A=1


To unsubscribe from the STDS-802-11-TGBQ list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBQ&A=1


OPPO

本电子邮件及其附件含有OPPO公司的保密信息,仅限于邮件指明的收件人(包含个人及群组)使用。禁止任何人在未经授权的情况下以任何形式使用。如果您错收了本邮件,切勿传播、分发、复制、印刷或使用本邮件之任何部分或其所载之任何内容,并请立即以电子邮件通知发件人并删除本邮件及其附件。
网络通讯固有缺陷可能导致邮件被截留、修改、丢失、破坏或包含计算机病毒等不安全情况,OPPO对此类错误或遗漏而引致之任何损失概不承担责任并保留与本邮件相关之一切权利。

除非明确说明,本邮件及其附件无意作为在任何国家或地区之要约、招揽或承诺,亦无意作为任何交易或合同之正式确认。
发件人、其所属机构或所属机构之关联机构或任何上述机构之股东、董事、高级管理人员、员工或其他任何人(以下称“发件人”或“OPPO”)不因本邮件之误送而放弃其所享之任何权利,亦不对因故意或过失使用该等信息而引发或可能引发的损失承担任何责任。
文化差异披露:因全球文化差异影响,单纯以YES\OK或其他简单词汇的回复并不构成发件人对任何交易或合同之正式确认或接受,请与发件人再次确认以获得明确书面意见。发件人不对任何受文化差异影响而导致故意或错误使用该等信息所造成的任何直接或间接损害承担责任。

This e-mail and its attachments contain confidential information from OPPO, which is intended only for the person or entity whose address is listed above. Any use of the information contained herein in any way (including, but not limited to, total or partial disclosure, reproduction, or dissemination) by persons other than the intended recipient(s) is prohibited. If you are not the intended recipient, please do not read, copy, distribute, or use this information. If you have received this transmission in error, please notify the sender immediately by reply e-mail and then delete this message.

Electronic communications may contain computer viruses or other defects inherently, may not be accurately and/or timely transmitted to other systems, or may be intercepted, modified ,delayed, deleted or interfered. OPPO shall not be liable for any damages that arise or may arise from such matter and reserves all rights in connection with the email.

Unless expressly stated, this e-mail and its attachments are provided without any warranty, acceptance or promise of any kind in any country or region, nor constitute a formal confirmation or acceptance of any transaction or contract.
The sender, together with its affiliates or any shareholder, director, officer, employee or any other person of any such institution (hereinafter referred to as "sender" or "OPPO") does not waive any rights and shall not be liable for any damages that arise or may arise from the intentional or negligent use of such information.
Cultural Differences Disclosure: Due to global cultural differences, any reply with only YES\OK or other simple words does not constitute any confirmation or acceptance of any transaction or contract, please confirm with the sender again to ensure clear opinion in written form. The sender shall not be responsible for any direct or indirect damages resulting from the intentional or misuse of such information.

To unsubscribe from the STDS-802-11-TGBQ list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBQ&A=1